Premium driveway & concrete cleaning by the family-run crew SFV, LA & Ventura homeowners trust. The right method for every surface, guaranteed.
Thanks, we got it. A member of the WashPro crew will reach out shortly with your free estimate.
Or Call Us NowWashPro SFV provides professional driveway and concrete cleaning for homes across Los Angeles County and Ventura County. We restore residential flatwork of every kind: broom-finish driveways, walkways, steps, patios, pool decks, garage aprons, stamped concrete and paver surfaces. The standard is simple. Concrete should read as one clean, uniform color from the street, with oil, rust and grime actually removed instead of smeared into a lighter shade of dirty.
A full concrete visit covers more than a rinse:
Flatwork sits inside our larger pressure washing service line, but concrete earns its own page because concrete punishes shortcuts. Wash it wrong and the damage is permanent. Treat it right and a thirty-year-old slab can come back looking close to new.
Southern California is hard on concrete in a way wet climates never are. It barely rains for eight months, so everything that lands on your driveway stays on your driveway. Brake dust, soot, leaf tannins, fertilizer overspray, the slow drip from every car that has ever parked on it. The sun bakes that mix into the surface week after week. Then the first real rain arrives, lifts the oils, and redistributes them across the slab as a single gray film.
Water makes its own mess here too. Sprinklers keep shaded borders damp under the morning marine layer, and damp concrete grows algae and mildew, the green and black shadows that creep along walkway edges and north-facing patios. Hard tap water dries into mineral crust wherever overspray lands. And on pavers and masonry, moisture wicking up through the material pushes salts to the surface as efflorescence, the white chalky bloom that a garden hose will never touch.
Then there is the simple math of curb appeal. On most SFV, LA and Ventura properties, the driveway is the single largest surface visible from the street. A stained slab drags down a freshly washed home, and a bright one sharpens the entire property. That is why so many clients pair concrete work with a house washing visit. Clean walls over dirty flatwork is a job half finished.
Anyone can rent a pressure washer. The wand-only approach is exactly how driveways end up striped, because no human hand holds the same height, angle and speed across hundreds of square feet. We run professional surface cleaners instead: spinning jets under a flat hood that ride at a fixed distance and overlap every pass. The result is one uniform finish across the whole slab, with none of the zebra striping or etched wand lines that scream amateur work from the curb.

Pressure alone does not remove most concrete stains. It just tears at the surface until the stain looks blurry. Every stain on your slab gets its own treatment:
Decorative concrete is where untrained crews do the most damage. Stamped surfaces carry their color in a thin top layer, and paver joints depend on the sand packed between them. We clean both at reduced pressure with the equipment dialed back, then offer the step most companies skip: fresh joint sand for pavers and a quality sealer over the finished surface. Sealing is the difference between a clean that lasts one season and a clean that lasts years. It blocks oil from soaking in, locks the joint sand against weeds and ants, and brings the color back up to what you paid for when it was installed.


Most single driveways in SFV, LA and Ventura run roughly $150 to $400 to clean, depending on size and stain load. Whole-property flatwork packages, driveway plus walkways and patio, typically land between $350 and $900. Re-sanding and sealing are quoted separately. Your exact number is free and usually same day.
We quote every property individually, and these are the factors that actually move the number:
| Factor | Why It Moves The Price |
|---|---|
| Square footage | Flatwork is priced by area, so the size of the slab sets the baseline |
| Stain load | Oil, rust and efflorescence each require their own chemistry pass on top of the wash |
| Surface type | Stamped concrete and pavers clean slower at reduced pressure to protect color and joints |
| Re-sand and seal | Optional add-on with real material cost, repaid in years of stain protection |
| Access and water | Long hose runs, slopes and limited spigots add setup and rinse time |
| Bundling | Adding concrete to a house wash or window visit beats paying two trip charges |
Want deeper context before you call? Our guide to pressure washing costs in Los Angeles breaks down flatwork rates honestly, and the blog carries more straight-answer guides like it. Or skip the reading. Call or text 747-202-3622 or request a fast quote and we will price your exact concrete, free.
We will also tell you the truth about what will not come out. Deep oil shadows in old, unsealed concrete and rust that has etched for years can lighten dramatically yet leave a ghost. You will know exactly what to expect before we start, not after.

The track record is public. WashPro SFV holds reputation for consistent, careful work, licensed and insured, family owned and operated out of the San Fernando Valley. Same crew every visit, so the technician on your driveway next year already knows your property. See what neighbors across both counties say on our reviews page.
Coast to foothills, one family crew covers it all. We clean driveways and flatwork across Los Angeles County and Ventura County.
A bright driveway shows off everything around it. While the crew is staged on site, finish the rest.
Call, text or send the form. We'll get right back to you with a free, no-pressure estimate, anywhere in Los Angeles or Ventura County.
Thanks, we got it. A member of the WashPro crew will reach out shortly with your free estimate.
Or Call Us Now